Car Spray Paint for Removing Scratches

The application of car paint protection Adelaide is easy-to-do and gives smooth finish effortlessly in single application. But before you buy car paint for scratches make sure you are aware of the apt methodology of using them else it can jeopardize your effort. Read further to apprise yourself with the directions to use the paint correctly in order to extract maximum benefits out of it.

First check the color. Before applying paint on the target area, apply a bit on any remote area. Match the color and its application and then you are good to use it as a Pro.
Prepare the surface before applying the Touch Up Spray Paint. For this, you will need a textured paper for rubbing off rust, old paint and other polish etc. this will lend smoothness to the target surface. Don’t forget to use masking tape to cover the rest of the area of the car from over spilling of paint.
For minor scratches, dab Emery Pad EP-2500 in water and mildly rub the scratch back and forth while applying a little pressure on it by hand. Repeat the motion till the scratch disappears. Wait for the area to dry a bit and as it appears to uniform and smooth you can use Com-Paint spray on it.
For deep scratches, use Com-Fill Paste. Use a rubber applicator to stroke light coats on the scratch. Don’t forget to instantly wipe off excess paste. Leave the paste at rest for at least 30 minutes. With the help of EP-400, apply uniform pressure on the area to be touched up with the adjacent area. Now apply spray paint on the surface.
Before use, shake the Com-Paint Can vigorously until Agitator ball moves freely. Keeping the can at a distance of 25cms from the target surface, spray the paint in stroking motion to eliminate dripping of paint. A gap of 5 minutes is advisable between the coats.
After finishing the application, spray Com-Merge-Finishing Solvent on the outer area of the target area to let the paint merge with the surrounding surface. Let the area dry for 72 hours. If the spray can button clogs, it is better to clean or replace the tip of the applicator in order to cause blot while painting.

Follow these six easy steps and you are done with saving the shine of your car while making it appear scratch free. Take a clean cloth in the end and rub across the area to restore the shine and give finishing strokes.

TIP: Keep Emery Pads and paint surface wet while dabbing. Do not use the product if the surface is hot to touch. It is advisable to use masking tape only while using touch up paint for cars to protect other areas from over spilling of paint. Use of any other tape or cello tape may cause the paint to scale out. It is ideal to use the products of the kit only as they are meant for complete action and to rectify errors at every proceeding step.

Leave a Reply

Your email address will not be published. Required fields are marked *